This post is a work in progress...not yet done....
Plot out other holes and use spray paint to show center and diameter:
Second hole dug:
We used string to help make sure it stayed square while bracing the first 6"x 6" x 16':
Two poles cemented in and 1" galvanized pipe through the top. We will tighter when we add the caps to each end:
And now there are four! Posts are all cemented in and level.
Need to drill holes through the front two posts to hang a bar at seven feet high. Then on the two sides another bar at 9 feet high. On the left side will be a wall. the far side will be a rock climb. The inner side will be for wall balls, wall climbs, handstand push-ups, etc. Still need to hang the extension piece for the rope climb and don't forget the hooks for the hammock to rest in when done WODing!
Here it is without the scaffolding...
I will take a new picture soon so you can see what it looks liek now. It now has the extension up for the 15 foot rope climb and another bar. This bar is currently at 10 feet but we are lowering it to about 8 1/2 or 9 feet and the wall on the left side needs to get put up. The braces are down. I need to get a rubber mat.
No comments:
Post a Comment